Description

Lecol PVAc adhesive 750ml

Dispersion adhesive and for bonding floating wood floors to be installed in the tongue and groove. Ideal for Parquet, infills, tricky cut-ins and much more!

A suitable high-bond strength craft, modelling and general DIY PVA adhesive.

This PVAc dispersion adhesive has a thin viscosity so that it is easy to apply by hand, and the bottle has a handy keep-clean spout, that can be cut to size as required.

For use with Wood floors- the parquet is placed floating, ie no glue is applied to the sub floor. The parquet is only glued into the tongue and groove of the longitudinal side of the parquet parts and is therefore placed floating on the substrate. If there are also end-to-end tongue and groove sides, the Lecol PVAc glue is of course also applied here. The adhesive is applied to the tongue or groove on one side, depending on the instructions of the parquet manufacturer.

Especially suitable for glueing laminate, engineered wood and floor trims such as Oak doorbars or scotia.

Important information:

• The glued parts should be joined together within 5 to 7 minutes.
• Apply sufficient pressure (for example with a hammer in combination with a parquet iron), so that the joints are completely closed.
• We recommend allowing the adhesive to dry for at least 12 hours before using the floor.
• Do not store the adhesive below + 5 ° C. Sensitive to frost, also avoid storage above + 30 ° C.
• Consumption is approximately 750 grams for 20m² with tongue and groove bonding.